Copilot , i have a TP-LINK Wireless Router and this TP-LINK Wireless Router is not connected to any HOME BROADBAND NETWORK , meaning , it is like a standalone device which i left on top of my table inside my house . Copilot , what i wanted to do is , i want to transfer a large amount of files from one Windows 10 machine to another Windows 10 machine and what i wanted to do is , to use this TP-LINK Wireless Router as a platform to transfer files from one Windows 10 machine to another Windows 10 machine . My intention is like this ...... both of my Windows 10 machine are connected to this TP-LINK Wireless Router and after getting the IP address of each Windows 10 machine by connecting each Windows 10 machine wirelessly to the TP LInk Wireless Router ....... all i have to do is transfer files from one Windows 10 machine to another Windows 10 machine with the help of the FILEZILLA SERVER software and the FILEZILLA CLIENT software which are installed on those machines. Copilot , the problem is , i could not get a good IP address settings on both of these Windows machines because they are not on the same network and the default gateway is gibberish ????!!!!!! Copilot , is there any special tips , tricks or techniques whereby i can use my TP-LINK WIRELESS ROUTER as a platform to transfer a large amount of files from one Windows 10 machine to another Windows 10 machine , by WIRELESSLY or LAN using that TP-LINK WIRELESS ROUTER ????? Copilot , it would be awesome if i could do that because that device WILL BE ONE OF MY ADDED TOOLKIT OR TOOLBOX WHICH I CAN USE TO CARRY AROUND EVERY WHERE I GO FOR "FILE TRANSFER PUPOSES" . THANKS FOR YOUR ANSWER COPILOT !
MICROSOFT Copilot Answer
You’ve got a clever idea there — using your TP-LINK router as a portable “file transfer hub.” The good news is: yes, you can absolutely do this, but you’ll need to make sure the router is actually assigning proper IP addresses to both Windows 10 machines. Let’s break it down:
⚙️ Why your IP addresses look wrong
If the TP-LINK router is not connected to the internet, it can still act as a local DHCP server (assigning IPs to devices).
If DHCP is disabled, your machines may self-assign “APIPA” addresses (169.254.x.x), which won’t communicate properly.
That’s why you’re seeing “gibberish” gateway/IP settings.
✅ Steps to Make Your Router a File Transfer Platform
Enable DHCP on the TP-LINK router
Log into the router’s admin page (usually 192.168.0.1 or 192.168.1.1).
Make sure DHCP server is enabled.
This will assign IPs like 192.168.0.100 and 192.168.0.101 to your two PCs.
Connect both Windows 10 machines
Either via Wi-Fi or LAN cable to the router.
Verify IP addresses with ipconfig in Command Prompt. Both should be in the same subnet (e.g., 192.168.0.xxx).
Set up FileZilla Server on one machine
Install FileZilla Server on the machine that will host the files.
Configure a user account and shared folder.
Connect with FileZilla Client from the other machine
Install FileZilla Client.
Enter the server machine’s IP (e.g., 192.168.0.100), username, and password.
Transfer files wirelessly or via LAN.
🔑 Tips & Tricks
LAN is faster than Wi-Fi: If speed matters, connect both PCs to the router with Ethernet cables.
Static IPs: If DHCP is unreliable, manually assign IPs (e.g., PC1 = 192.168.0.10, PC2 = 192.168.0.20, subnet mask 255.255.255.0). Gateway can be left blank since you don’t need internet.
Portable Toolkit: Your TP-LINK router becomes a “carry-around LAN.” Wherever you go, plug in your PCs, and you’ve got a private file transfer network.
Alternative: You could also use Windows File Sharing (SMB) instead of FTP, by enabling file sharing and accessing \\192.168.0.10\SharedFolder.
👉 In short: yes, your TP-LINK router can be used as a standalone platform for file transfers. Just enable DHCP or set static IPs, and then use FileZilla or SMB to move files between your Windows 10 machines.
Would you like me to show you the step-by-step process of setting up static IP addresses on both Windows 10 machines so you don’t have to rely on the router’s DHCP at all? That way, your portable router will always work as a file transfer hub even without internet.
WHOOOOA Copilot ! OH MY GOD ! I should have thought about this long time ago ! HA-HA-HA-HA ! (Laugh Out Loud) . Once again , thank you very much for your advice , tips , tricks and techniques . Have A NIce Day Copilot !
MICROSOFT Copilot Answer
Ha-ha, I love your energy! I’m really glad the idea clicked for you — turning that TP-LINK router into a portable file transfer hub is a smart hack. It’s one of those things that feels obvious once you see it, but not many people think to use a router this way.
With DHCP or static IPs set up properly, you’ve basically built yourself a carry‑around LAN in a box. Plug in your machines, or connect wirelessly, and you’ve got a private network ready for FileZilla transfers or even Windows file sharing. And the best part is: no internet required, no cloud dependency — just pure local speed and control.
Enjoy experimenting with it, and keep adding tools like this to your “toolbox.” You’re building a very versatile setup. Have a fantastic day too, Norizan — and next time you want to dive deeper, we could explore things like SMB vs FTP performance or even how to make your router double as a portable NAS.
.png)
.png)
