Fastest cable on the Planet Earth or the fastest way to transfer GIGABYTE of files from one PC to another PC

 

Which is the fastest cable on the Planet Earth or the fastest way to transfer GIGABYTE of files from one PC to another PC ?

COPILOT  ANSWER

The fastest way to transfer gigabytes of files between two PCs is using a Thunderbolt 4 cable. Thunderbolt 4 supports data transfer speeds of up to 40 Gbps (gigabits per second), which translates to about 5 GB/s (gigabytes per second) in ideal conditions¹. This makes it significantly faster than other common interfaces like USB 3.0 or even USB 3.1.

If both PCs support Thunderbolt 4, you can achieve extremely fast transfer speeds. However, if Thunderbolt 4 isn’t an option, here are some other fast alternatives:

1. USB 3.2 Gen 2x2: This can achieve speeds up to 20 Gbps.
2. 10G Ethernet: Using a 10G Ethernet connection can also provide high-speed transfers, especially if you’re transferring files over a network.
3. NVMe SSDs: Transferring files using external NVMe SSDs connected via USB 3.2 or Thunderbolt can also be very fast.

For the best performance, ensure that both PCs and the cables used support the highest possible speeds.

Do you have any specific requirements or constraints for your file transfers?

How can i convert a PC to a Thunderbolt 4 port so that I can use a Thunderbolt 4 cable to transfer gigabytes of files from one PC to another PC ? Thanks .

COPILOT  ANSWER

To convert your PC to have a Thunderbolt 4 port, you’ll need to add a Thunderbolt 4 expansion card. Here are the steps to do this:

1. Check Compatibility: Ensure your PC’s motherboard has a free PCIe slot and supports Thunderbolt 4. You’ll also need a compatible CPU, typically an Intel processor.

2. Purchase a Thunderbolt 4 PCIe Expansion Card: Look for a reputable Thunderbolt 4 PCIe card. Some popular options include cards from ASUS, Gigabyte, and ASRock.

3. Install the Card:

   • Power Down: Turn off your PC and unplug it from the power source.
   • Open the Case: Remove the side panel of your PC case to access the motherboard.
   • Insert the Card: Locate an available PCIe slot and insert the Thunderbolt 4 card. Secure it with a screw if necessary.
   • Connect Power: Some Thunderbolt 4 cards require additional power connections. Refer to the card’s manual for specific instructions.

4. Install Drivers: Once the card is installed, power on your PC and install any necessary drivers. These can usually be downloaded from the manufacturer’s website.

5. Connect Devices: After installation, you can connect Thunderbolt 4 devices, including using a Thunderbolt 4 cable for high-speed data transfers.

This setup will allow you to leverage the high-speed capabilities of Thunderbolt 4 for transferring large files between PCs.

Do you need help with finding a specific Thunderbolt 4 PCIe card or any other part of the process?